D.P.Engineers

Minimum order quantity: 12 Piece

GEMTECH Differential pressure gauge in chawri bazar Delhi
Series 2000,GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature -  -21 140 6 60

• Rated Pressure -20 inHg~30 inHg (-68~103KPa)

• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).

• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back

• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test

• Accuracy - ±2% of full span at 70(21(±3% on -0, and ±4% on -00)

• Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

Minimum order quantity: 24 Piece

GEMTECH Model GT-1KPA Differential Pressure Gauge Range .5-0-.5 KPA

Model GT-1KPA

Range .5-0-.5 KPA

Series GEMTECH Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series GEMTECH Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits: 20 to 140“F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size: 4" (101.6 mm) diameter dial face.
• Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
• Process Connections: 1/8" female NPT duplicate high and low pressure taps • one pair back.
• Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
• Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.

Minimum order quantity: 24 Piece

GEMTECH Model GT-04 INCH Differential Pressure Gauge Range 2-0-2 INCH

Model GT-04

Range 2-0-2 INCH

Series GEMTECH Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure.

Series GEMTECH Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential.

Product Applications:

• Filter monitoring
• Blower Vacuum Monitoring
• Fan Pressure Indication
• Duct, Room or Building Pressures
• Clean Room Positive Pressure Indication

• Service: Air and non-combustible, compatible gases (natural gas option available). Wetted Materials: Consult factory
• Housing: Die cast aluminum case and bezel with acrylic over(MP model has polycarbinate cover)
• Accuracy: ±2% of full scale (±3%on -0,-100 Pa,-125 Pa.l0MM and ±4% on -00, -60 Pa, -6MM ranges), throughout range at 70‘F (21.1‘C).
• Pressure Limits:-20 in Hg to 15 psig (-0.677 bar to 1.034 bar); MP option: 35 psig (2.41 bar); HP option: 80 psig (5.52 bar).
• Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only. The blowout plug is not used on models above 180 inches of water pressure, medium or high pressure models, or on gauges which require an elastomer other than silicon for diaphragm.
• Temperature Limits: 20 to 140“F*(-6.67 to 60'C).*low Temperature models available as special option.
• Size: 4" (101.6 mm) diameter dial face.
• Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
• Process Connections: 1/8" female NPT duplicate high and low pressure taps • one pair back.
• Weight: 1 lb 2 oz (510 g), MP 6 HP 2 lb 2 oz (963 g).
• Note: May be used with hydrogen when ordering Buna-N diaphragm. Pressure must be less than 35 psi.