D.P.Engineers

Minimum order quantity: 5 Piece

High Temperature HEPA Filter 250 Degrees Temperature

Application: Some Oven,and High Temperature Ventilation System in Pharmaceutical,Hospital,Chemical Industries,Medical infusion Production line,Industrial Production Sterilization,Drying and Other environments and Some Heat Resistant Cleanroom Equipment;

There are Two Different Type of High Temperature HEPA Filters

1. 250°C High Temperature Heat Resistant HEPA Filter
2. 400°C High Temperature Heat Resistant HEPA Filter

Frame: Aluminum Alloy/Galvanized Steel Stainless Steel 201/304/316/316L

For Temperature Below 250°C, Any Material Are Available;

For Temperature Upon 400°C, Stainless Steel is Recommend;

Filter Material: Fine Glass Fiber

Separator: Aluminum Foil Corrugated

Sealant: High Temperature Resistant Or Ceramic Glue

For Temperature From 250°C to 400°C, Ceramic Glue Necessary

Gasket: High Temperature Silicon Rubber Bar/Glass Fiber Bar

For Temperature Below 250°C, Silicon Rubber Bar;

For Temperature From 250°C to 400°C, Glass Fiber Bar

Continuous Working Temp: ≤250°C or ≤400°C Two Different Choice

Frame Construction Design

Double Turn Flange

Single Turn Flange

Boxed

Normal Thickness 150 MM or 300 MM,

Normal Size: 610*610*300 / 150 MM ( 24*24*12 / 6 inch )

305*610*300 / 150 MM ( 12*24*12 / 6 inch )

Here Is The Pictures Of 350-400°C High Temperature HEPA Filters

300 Degrees Temperature HEPA Filter 

Application: Some Oven,and High Temperature Ventilation System in Pharmaceutical,Hospital,Chemical Industries,Medical infusion Production line,Industrial Production Sterilization,Drying and Other environments and Some Heat Resistant Cleanroom Equipment;

There are Two Different Type of High Temperature HEPA Filters

1. 250°C High Temperature Heat Resistant HEPA Filter
2. 400°C High Temperature Heat Resistant HEPA Filter

We put forward a broad range of Pleat HEPA Filter It is ideally suitable for protection against harmful particles emitted from radioactive substances. Our offered filter is manufactured in adherence with the set industry standards using advanced technology and optimum quality raw material. In tune with international quality standard, we provide the entire range in various sizes and specifications as per the requirement of our clients. Our quality controllers perform a series of test on various parameters, in order to ensure the quality of this filter. Apart from this, clients can avail the entire range from us at industry leading rates.

Features:

• Easy to clean
• High efficiency
• Compact size

Minimum order quantity: 5 Piece

Aluminium Anodized HEPA filters in Roorkee
In Order To Cater The Variegated Demands Of Our Precious Clients, We Are Offering A Wide Range Of High Efficiency Particulate Air Filter (Deep Pleated).Product SpecificationFrame Material Aluminium AnodizedModel Name  D.P.ENGINEERSSeparators AlluminiumMedia Glass FibrePressure Drop Initial 25 mm WCMax Working Pressure 70 mm WCTemperature Ambient to 120 Deg CMinimum Order Quantity 10 Unit
Product DescriptionIn Order to Cater The Variegated Demands of Our Precious Clients, We Are Offering a Wide Range of High Efficiency Particulate Air Filter (Deep Pleated).       CFM       W       H        D        M2DP - 1000    610 MM X 610 MM X 300 MM - 22.67DP  - 500     610 MM X 610 MM X 150 MM - 9.33DP  - 250     305 MM X 305 MM X 300 MM - 5.13DP  - 125     305 MM X 305 MM X 150 MM - 2.11DP  - 560     458 MM X 458 MM X 300 MM - 12.15DP  - 280     458 MM X 458 MM X 150 MM -  5

Industrial HEPA Filters

We manufacture and supply a wide range of Industrial HEPA Filters which has high filtration efficiency. These are manufactured by hemmed edges of aluminum separators in order to provide rigidity uniform air flow. We do quality analysis and testing of these Industrial HEPA Filters before we handover this to our valuable clients. We have specialized team of experts who do quality checking under certain parameters that meets international standards.

Salient features are as follows:

• Aluminum, S.S and G.I is used to make the body of HEPA filter
• Used in biomedical purpose, vacuum cleaners, nuclear industry, aerospace, nuclear power, pharmaceutical processing, health care, hospitals, nuclear fuels, and electronic micro circuitry (computer chips).

• Product Description

  D.P.Engineers manufactures full range of Hepa Filters Deep Pleat Air Filters from coarse filters to ULPA filters. Our filters are a bench mark in the industry.

  Features:

  Available at 90% down to 20 microns

  A combination of flat & corrugated layers of metallic mesh

  Available with GI / Brass / Aluminium / SS meshes

  Fineness of the mesh increases towards the air leaving side.

  Suitable as a paint booth exhaust and kitchen hood exhaust filter

  To be used in series with a louver filter attached to it to obtain good life of the filter..

Product Description“D.P.Engineers” filters are manufacturing V Cell Hepa Filters to provide high efficiency filtration at low energy consumption and compact format. V-Cell can be used in any air conditioning application and preparatory filtration in cleanrooms.

Features:
Robust constructionLong operating lifeVery large surface areaLarge surface areaNo metal partsIdeal for HVAC & Gas turbine
Advantage:Competitive cost effective 4 V Bank design filter with less than 100 PaEfficiency guaranty: No discharge effect, exceeding EN779: 2011 performances requirementContains a very small fiber diameter material in a rigid and safe frame design. This guarantees very high and consistent filter efficiency for sub-micron particlesReliable performance makes it the ideal final stage filter to meet the European standard for ventilation of non-residential buildings, EN13779.Description:Application: Air conditioning applications and pre-filtration for clean roomType: High efficiency, incinerable filter.Frame: ABS.Media: Glass fiber paper.Separator: Hot-melt beads.Sealant: Polyurethane.EN779: 2012 filter class: M6, F7, F8, F9.ASHRAE 52.2: 1999 filter class: MERV 11, MERV 13, MERV 14, MERV 15.Recommended final pressure drop: 500 PaTemperature: 70 °C maximum in continuous service.

Minimum order quantity: 5 Piece

Product DescriptionType of Air Filter stand for High Efficiency Particulate AirMostly find application in Medical Facility,Automobiles, HVAC system.HEPA filter are composed of a mat of randomly arranged fibres.The fibres are typically composed of fiberglass and possess diameter between 0.5 @ 2 micrometer.Key factors affecting its functions are fibre diameter,filter thickness & face velocity.Having efficiency of 99.97% against 0.3 micron particleFeaturesType:Flat Mesh PanelFrame:Galvanized Steel, Aluminium and Stainless SteelFilter Media:Synthetic FiberGrids:Aluminium Mesh And Stainless Steel MeshEN 779 Class:G2G4Average Arrestance:74% 94%MERV:MERV 38Final Pressure Drop:(Recommender) 150Pa -Maximum 250PaMax. Air Flow Rate:125% of Nominal Air Flow RateMax.Operating Temperature:100Max.Relative Humidity:100%Applications:Coarse Particle Filtration

Minimum order quantity: 5 Piece

High Temperature HEPA Filter 400 Degrees Temperature

Application: Some Oven,and High Temperature Ventilation System in Pharmaceutical,Hospital,Chemical Industries,Medical infusion Production line,Industrial Production Sterilization,Drying and Other environments and Some Heat Resistant Cleanroom Equipment;

There are Two Different Type of High Temperature HEPA Filters

250°C High Temperature Heat Resistant HEPA Filter

400°C High Temperature Heat Resistant HEPA Filter

Frame: Aluminum Alloy/Galvanized Steel Stainless Steel 201/304/316/316L
For Temperature Below 250°C, Any Material Are Available;
For Temperature Upon 400°C, Stainless Steel is Recommend;

Filter Material: Fine Glass Fiber
Separator: Aluminum Foil Corrugated
Sealant: High Temperature Resistant Or Ceramic Glue
For Temperature From 250°C to 400°C, Ceramic Glue Necessary

Gasket: High Temperature Silicon Rubber Bar/Glass Fiber Bar
For Temperature Below 250°C, Silicon Rubber Bar;
For Temperature From 250°C to 400°C, Glass Fiber Bar
 Continuous Working Temp: ≤250°C or ≤400°C Two Different Choice

Frame Construction Design
Double Turn Flange
Single Turn Flange
Boxed
 Normal Thickness 150 MM or 300 MM,
Normal Size: 610*610*300 / 150 MM ( 24*24*12 / 6 inch )
305*610*300 / 150 MM ( 12*24*12 / 6 inch )
 Here Is The Pictures Of 350-400°C High Temperature HEPA Filters

Separator Type HEPA Filter Constructed with 20 gauge powder coated mild steel frame with a continuous band of media pleated back and forth over corrugated aluminum separators. These filters contain a two-part polyurethane, which assures a positive seal of the media pack and frame. The interlocking frame design with sealant placed behind the top and bottom flange allows unobstructed air flow and ease of filter handling.

Benefits:

The D.P.ENGINEERS Hepa Filters corrugated aluminum separators assure even pleat spacing. The hemmed edges on the aluminum separators reduce possible pleat damage.

HEPA Filters Efficiency test conducted to ensure the 99.97% efficiency with challenging DOP aerosol system.

Specifications:

• Medium Material: Fiberglass
• Efficiency: 99.995%
• Dimension: Customized

Cylindrical HEPA Filter

Hepa Filter Cylindrical are round type manufactured by latest technology. These are filters helps in cleaning the environment as air filters remove solid particulates,such as dust,pollen,mold,and bacteria form the air.We make use of quality raw material and make sure that our clients receive only a best available range of products.

Specifications:

• Type: Circle or Round
• Frame: Plastic Caps
• Protech: Plastic Expanded Mesh
• Filter Media: Sub micronic glass fiber media (H and V Company USA Make)
• Sealant: Epoxy Sealed
• BS EN 779 Class: H 12, H 13
• Particulate Efficiency: 0.3 micron and Average Arrestance 99.97 or 99.99%
• Eurovent Class: EU-12, EU-13

Being a client centric organization, we are involved in manufacturing and supplying a wide range of deep pleat hepa filters. These specially designed and developed filters are available in various dimensions and technical specifications. Entire range of our deep pleat hepa filters is made under the firm direction of quality controllers, who ensure us for the delivery of 100% defect free range at our clients end.

Features: 

• Low resistance
• Large dust holding capacity
• High efficiency

Other Information

• Pay Mode Terms: T/T (Bank Transfer)

• Medium Material: Fiberglass
• Dimension: Customized
• Color: Grey

We put forward a broad range of High Efficiency Particulate Air Filter. It is ideally suitable for protection against harmful particles emitted from radioactive substances. Our offered filter is manufactured in adherence with the set industry standards using advanced technology and optimum quality raw material. In tune with international quality standard, we provide the entire range in various sizes and specifications as per the requirement of our clients. Our quality controllers perform a series of test on various parameters, in order to ensure the quality of this filter. Apart from this, clients can avail the entire range from us at industry leading rates.

Features:

• Easy to clean
• High efficiency
• Compact size

Our organization is in the leading position of manufacturing and supplying HEPA Panel Filter that are fabricated using the effective quality of material that is procured from the consistent and trustworthy vendors of the market. It is used in several industries to distil the dust particles. These are available in various sizes and lengths as per the client requirement. It is widely demanded for best efficiency, easy to install, sturdy and dependable.